How Often does the Industrial Oxygen Generator Need to Replace the Water?

The industrial oxygen generator adopts high-tech bipolar oxygen generation technology. The oxygen generation module in the instrument automatically selects oxygen molecules in the air and ionizes them into negative oxygen ions under normal pressure, and the negative oxygen ions are sucked in by the gravity of the positive electrode. Module. After the negative oxygen ions reach the positive electrode, they release electrons and are reduced to oxygen, the purity of which can reach about 99%, and the oxygen concentration and gas output are adjusted by mixing air with the air pump to obtain a high concentration of oxygen of about 30%-99%.

Water in industrial oxygen generator:
The water in the humidification cup of the industrial oxygen generator is used to humidify the oxygen, so that the oxygen will not appear too dry when it is sucked up. Generally, the water in the humidification bottle of the industrial oxygen generator must be poured out every time it is used up .

Industrial oxygen generators also have some other attention issues:
(1) If the industrial oxygen generator adopts first and second filter cotton, it must be cleaned once every half a month and air-dried naturally.
(2) The casing of the industrial oxygen generator should be scrubbed regularly.
(3) Do not place any debris at the bottom of the fuselage of the industrial oxygen generator, and keep the room ventilated.