How to Maintain an Industrial Oxygen Generator?

1. The outlet pressure of the filter pressure reducing valve is not within the normal range. At this time, it is necessary to adjust the filter pressure reducing valve. Adjustment method: Pull up the knob on the upper part of the filter pressure reducing valve, turn it clockwise to increase pressure, and turn counterclockwise to reduce pressure. When the required pressure is reached, press the knob to lock. The user should clean the filter body of the filter pressure reducing valve regularly to ensure air quality. Cleaning method: Rotate and pull down the bayonet cup at the bottom of the valve body, and clean the filter element and cup with a neutral detergent. The filter pressure reducing valve is an automatic drainage method, and the user should install the drainage pipe to an appropriate position.

2. During the regeneration process of the dryer, the pressure in the regeneration drying tower shall not exceed 0.02MPa. If it exceeds this value, after confirming that the valve is not faulty, it can be considered that the muffler is blocked. At this time, the muffler should be removed and the blockage should be cleared. If the blockage is severe and cannot be cleaned, the muffler should be replaced.

3. After the loaded desiccant has been running for a period of time, the drying bed will sink slightly, and the desiccant needs to be checked and refilled or replaced in time. The desiccant should be screened before loading to remove dust and make its particles uniform.

4. Regularly check the working status and sealing status of each valve. Regularly check whether the electrical components are in good contact, and often remove the dust inside and outside the distribution box.

The above is the main content of how to maintain the industrial oxygen generator. Industrial oxygen generators are favored by the majority of users due to their remarkable advantages. Widely used in metallurgical combustion, chemical, environmental protection, building materials, light industry, medical treatment, aquaculture, biotechnology, sewage treatment and other fields.